25
MCS2000
by MacAllister
In
more
detail...
GB
IE
Care and maintenance
The golden rules for care
Clean the product with a dry cloth. Use a brush for areas that
>
are hard to reach.
In particular clean the air vents (18) after every use with a cloth
>
and brush.
Remove stubborn dirt with high pressure air (max. 3 bar).
>
Keep the product clean. Remove debris from it after each use
>
and before storage.
Regular and proper cleaning will help ensure safe use and
>
prolong the life of the product.
Inspect the product before each use for worn and damaged
>
parts. Do not operate it if you find broken and worn parts.
General cleaning
WARNING!
Always switch the product off, disconnect it
from power supply and let the product cool down before
performing inspection, maintenance and cleaning work!
WARNING!
Only perform repairs and maintenance work
according to these instructions! All further works must be
performed by a qualified specialist!
NOTE:
Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this
product as they might be harmful to its surfaces.
Check for worn or damaged parts. Replace worn parts as
>
necessary or contact an authorised service centre for repair
before using the product again.
MNL_MCS2000_DFT_GB_V06_111108.indd 25
11/8/11 5:11:19 PM
