40
MCS2400
by MacAllister
In
more
detail...
GB
IE
When cutting a limb that is under tension be alert for spring
>
back.
When the tension in the wood fibres is released the spring
loaded limb may strike the operator and/or throw the chain saw
out of control.
Use extreme caution when cutting brush and saplings.
>
The slender material may catch the saw chain and be whipped
toward you or pull you off balance.
Carry the chain saw by the front handle with the chain saw
>
switched off and away from your body. When transporting
or storing the chain saw always fit the guide bar cover.
Proper handling of the chain saw will reduce the likelihood of
accidental contact with the moving saw chain.
Follow instructions for lubricating, chain tensioning and
>
changing accessories.
Improperly tensioned or lubricated
chain may either break or increase the chance for kickback.
Keep handles dry, clean, and free from oil and grease
>
.
Greasy, oily handles are slippery causing loss of control.
Cut wood only. Do not use chain saw for purposes not
>
intended. For example: do not use chain saw for cutting
plastic, masonry or non-wood building materials.
Use of the
chain saw for operations different than intended could result in a
hazardous situation.
Causes and operator prevention of kickback
Kickback may occur when the nose or tip of the guide bar touches
an object, or when the wood closes in and pinches the saw chain
in the cut.
Tip contact in some cases may cause a sudden reverse reaction,
kicking the guide bar up and back towards the operator.
Pinching the saw chain along the top of the guide bar may push the
guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of the saw
which could result in serious personal injury. Do not rely exclusively
upon the safety devices built into your saw. As a chain saw user,
you should take several steps to keep your cutting jobs free from
accident or injury.
Kickback is the result of tool misuse and/or incorrect operating
procedures or conditions and can be avoided by taking proper
precautions as given below:
Technical and legal information
Safety warnings
MNL_MCS2400_DFT_GB_V05_111108.indd 40
11/8/11 5:17:41 PM
