background image

Operating Instructions 

 

 

 

 
 
 

MAINTENANCE 

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit. 

 
PRODUCT SERVICE 

1)

 

Damage requiring service: 

 

The unit should be serviced by qualified service personnel if: 

(a) The DC power supply cord or AC adapter has been damaged; 
(b) Objects or liquids have gotten into the unit; 
(c) The unit has been exposed to rain; 
(d) The unit does not operate normally or exhibits a marked change in performance; 
(e) The unit has been dropped or the cabinet damaged. 
 

2)

 

Servicing Personnel: 

Do not attempt to service the unit beyond that described in these  

  operating instructions. Refer all other servicing to authorized servicing personnel. 
 
 

WARNING 

 

To prevent fire or shock hazard, do not expose this appliance to rain or moisture. 

 

To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts 
inside. Refer servicing to qualified service personnel. 

 

The  product  should  be  situated  away  from  heat  sources  such  as  radiators,  heat  registers, 
stoves, or other products that produce heat. 

 

When cleaning, unplug this product from the wall outlet before cleaning. The product should 
be  cleaned  only  with  a  polishing  cloth  or  a  soft  dry  cloth.  Never  clean  with  furniture  wax, 
benzine, insecticides or other volatile liquids since they may corrode the cabinet. 

 

This  product  should  be  operated  only  from  the  type  of  power  source  indicated  on  the 
marking label. 

 
 
 

Macab AB

 

Post: Box 3, SE-231 21 Trelleborg, Sweden 

Visit: Vannhögsgatan 7, SE-231 66 Trelleborg, Sweden 

Phone: +46 (0) 410 36 36 10   

Fax: +46 (0) 410 36 36 01 

[email protected] 

GRG-Macab AS

 

Industrigata 6 

NO-3400 Lier, Norway 

Phone: +47 32 22 99 90 

Fax: +47 32 22 99 91 

[email protected] 

Max Nordic A/S

 

Friis Hansensvej 2   

DK-7100 Vejle, Denmark 

Phone: +45 31 68 20 10 

[email protected] 

Summary of Contents for IP-1000 TX









Reviews: