MAC TOOLS UC3016-1DRW-BK Owner'S Manual Download Page 1

UC3016-1DRW-RD/ UC3016-1DRW-BK/ UC3016-1DRW-BL/ UC3016-1DRW-LG/ UC3016-1DRW-OR

 1 

07/22/2020

UC3016-1DRW-BK/UC3016-1DRW-BL 

UC3016-1DRW-LG/UC3016-1DRW-OR

UC3016-1DRW-RD

UTILITY CART WITH LOCKING LID

SERVICE CART WEIGHT CAPACITY

Total Load of Cart with All Accessories . . . . . . . . . . . . . . .  350 LBS
Lid Top Load   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 LBS
Top Shelf Load   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 LBS
Bottom Shelf Load  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 LBS
Drawer Load  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 LBS

PLEASE NOTE:

  

Loading cart beyond rated capacity may cause structural 

damage to the cart as well as personal and /or property damage. Please 

educate your customers to the dangers of overloading. Do not attempt to 

push cart with items on the top lid.

Total Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35.75"
Lid Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32.75"
Total Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31"
Total Length w/Screw Driver Holder   . . . . . . . . . . . . . . . . . . . 34.25"
Total Length w/Side Shelf Down . . . . . . . . . . . . . . . . . . . . . . .  32.25"
Total Length w/Side Shelf Extended  . . . . . . . . . . . . . . . . . . . . . 45.5"
Total Length w/Screw Driver Holder & 
Side Shelf Extended. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  48.5"
Total Depth   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.13"

Top Shelf Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3"
Top Shelf Width   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30"
Top Shelf Depth   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16"

1-Drawer Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3.75"
1-Drawer Width  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.75"
1-Drawer Depth  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15"

Bottom Shelf Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3"
Bottom Shelf Width  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30"
Bottom Shelf Depth  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16"

Ground Clearance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.88"
Bottom Shelf Top to Bottom of Drawer   . . . . . . . . . . . . . . . . . 16.25" 
 
Cart Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10,745"³
Lockable Volume  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,945"³

SPECIFICATIONS

TABLE OF CONTENTS

ENGLISH

.........................................Pg. 1 - 6

ESPAGNOL

....................................Pág 7 - 11

FRANÇAIS

......................................p. 12 - 16

OWNER'S MANUAL

Read and understand all instructions. Failure to follow all instructions listed below, 

may result in electric shock, fire, explosion and/or serious personal injury. It is the 

responsibility of the owner to make sure all personnel read this manual prior to using 

the tool. It is also the responsibility of the tool owner to keep this manual intact and 

in a convenient location for all to see and read. If the manual or product labels are 

lost or not legible, contact Mac Tools

® 

for replacements. If the operator is not fluent 

in English, the product and safety instructions shall be read and discussed with the 

operator in the operator's native language by the purchaser/owner or his designee, 

making sure that the operator comprehends its contents.

• Lock lid and drawers before moving. • Apply brake on locking casters 
anytime cart is in place. • Do not pull cart. Push from handle on end to move.  
• Units can tip or fall causing damage or personal injury. • Cart is designed to 
roll easily on flat surfaces and should not be used on  uneven or inclined surfaces.  
• Do not open more than one loaded drawer at a time. • Do not stand on or step 
in drawers. • Keep children away from unit. • Wear gloves when lifting edges. 
• Failure to heed these warnings may result in personal injury and/or property 
damage.

WARNING:

 This product can expose you to chemicals including nickel, which 

is known to the State of California to cause cancer and birth defects or other 
reproductive harm.  For more information go to www.P65Warnings.ca.gov.

WARNING

Summary of Contents for UC3016-1DRW-BK

















Reviews: