MAC TOOLS MCM849, Original Instructions Manual

Page: 5 / 28

English
3
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
Polisher
MCM849
Mac Tools declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-3:2011
+A2:2013 +A11:2014+A12:2014 +A13:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Mac Tools at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Mac Tools.
Markus Rompel
Vice-President Engineering, PTE-Europa
Mac Tools, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
08.08.2019
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury .
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury .
CAUTION: Indicates a potentially hazardous situation
which, if not avoided,
may
result in
minor or
moderate injury .
NOTICE:
Indicates a practice
not related to
personal injury which, if not avoided, may result in
property damage .
Denotes risk of electric shock.
Denotes risk of fire.
MCM849
Voltage V
DC
18
Type 1
Battery type Li-Ion
No-load speed min
-1
800–2200
Rated speed min -1 2200
Max. backing pad diameter mm
180
Spindle M14
Weight (without battery pack) kg 1.93
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-3:
L
PA
(emission sound pressure level) dB(A) 78
L
WA
(sound power level) dB(A) 89
K (uncertainty for the given sound level) dB(A) 3
Vibration emission value a
h
,P < m/s 2 2.5
Uncertainty K = m/s 2 1.5
English (original instructions)
Congratulations!
You have chosen a Mac Tools tool. Years of experience, thorough
product development and innovation make Mac Tools one of
the most reliable partners for professional power tool users.
Technical Data
POLISHER
MCM849