6
Back protection
The X-Dreamer foam protectors are designed to
protect the pilot in case of an impact and to reduce
the energy of impacts that could be caused by
unlucky takeoffs and landings.
The four-chamber back protector has 17 cm
thickness. The protector is divided into separate
compartments, to prevent air being dissipated too
rapidly in the event of a hard impact.
The lower frontal foam protector forms the shape of
the harness and is located beneath the space of the rescue system.
Optional additional protector for training
purpose
In some countries it is allowed to fly without a
rescue system up to certain height over the ground.
e.g. First short flights in the teaching process in the
school or personal training of ground handling. For
these purposes the rescue pocket can be optionaly
fitted with third additional foam protector for added
passive safety. With this additional foam protector
chamber the laboratory tests show further improved
G resistance.
Note! No protector can offer complete protection
against injury.
Speed bar
The X-Dreamer is serial supplied with a 2
step speed bar that allows accurate speed
control of the acceleration.
Attaching the cockpit
There are two tape loops on the chest strap below main carabiners for attaching the
cockpit. In according of cockpit design the main carabiners could also be used.
