W-UHF-100&200 SYSTEM OPERATION -HANDHELD MIC VERSION
1/ Unpack all the components of the system. We recommend that you keep your
packaging.
2/ Connect the AC adapter to the power connector on the back of the receiver and
receiver and then to the power outlet to charge its internal battery.
3/ Then plug this receiver into the audio input of your speaker/console.
4/ Press the power switch on the receiver, the power indicator will light up.
5/ 6/ On the handheld microphone, open the battery compartment. Insert the batteries
in the direction shown.
7/ Turn on the handheld microphone, if the battery indicator light flashes, your batte
-
ries are low.
8/ Press the SET button for 10 seconds, you will see «...» appear on the microphone
screen.
Then, when the receiver is in the off state, press and hold the power button for 5
seconds and the RF signal light will flash green/red, indicating that it is entering the
matching mode.
When the RF light on the receiver stops flashing and turns green, the match is com
-
plete. Press the SET button on the transmitter to exit the frequency match mode
Press the frequency control knob (CH+/CH-) on the transmitter to change the
frequency. Use a different frequency when using 2 or more microphones at one time.
Summary of Contents for W-UHF-100
Page 1: ...W UHF 100 200 MODE D EMPLOI USER MANUAL...
Page 7: ...English...
