25
110-119
Sound program3
120-129
Sound program4
130-139
Sound program5
140-145
Sound program6
150-159
Sound program7
160-255
Sound program8
CH26
0-255
Auto and Sound Program 1-8 speed ( From slow to
fast )
6. DMX 512 Connection
The DMX 512 is widely used in intelligent lightings and with a maximum of 512 channels.
1.
If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable.
2.
At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W
resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the
DMX-output of the last unit.
3.
Connect the unit together in a ‘daisy chain’ by XLR plug from the output of the unit to the
input of the next unit. The cable cannot be branched or split to a ‘Y’ cable. DMX512 is a very
high-speed signal. Inadequate or damaged cables, solder joints or corroded connectors can
easily distort the signal and shut down the system.
4.
Each lighting unit needs to have an address set to receive the data sent by the controller. The
address number is between 0-511 (usually 0 & 1 are equal to 1).
7. Troubleshooting
Following are a few common problems that may occur during operation. Here are some
Summary of Contents for MULTI-FX BAR
Page 1: ...1 MULTI FX BAR ...
