21
In
more
detail...
GB
IE
MSSD36T-Li
by MacAllister
Operation / Care and maintenance
General operation
WARNING!
Keep in mind that there are buried objects hidden in
every household! Ensure that there are no gas, water or power lines
hidden in the working area that may be hit before operation – danger
of electrical shock and serious damage to people and property! Use a
suitable detector to trace such objects in advance!
Screw driving
> Pre-drill the holes with a smaller diameter of the screw to be screwed.
> Hold the product perpendicular to the screw to be screwed in/out. Holding it at
an angle may cause slipping or jamming of the driver bit.
> Place the tip of the driver bit directly on the screw first and then switch the
product on.
> Only apply as much pressure as necessary to keep the screw in place and the
driver bit in contact with the screw head. Too much pressure will cause damage
to the screw head and driver bit, too little pressure will cause the driver bit to
slide away.
> Remove blocked and stuck screws by changing the rotational direction.
After use
> Switch the product off and let it cool down.
> Check, clean and store the product as described below.
The golden rules for care
WARNING!
Always switch the product off, disconnect the product from
the power supply and let the product cool down before performing
inspection, maintenance and cleaning work!
> Keep the product clean. Remove debris from it after each use and before
storage.
> Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
