30
31
MPWP2100-2
By MacAllister
MPWP2100-2
By MacAllister
In
more
detail
. . .
In
more
detail
. . .
Operation
On/off switch
1.
Make sure the on/of
f switch
(3)
is on “
O
”(of
f) (Fig.
25
).
2.
insert the plug
(1)
into a properly installed socket.
3.
T
urn the on/of
f switch
(3)
to “
I
” (on) (Fig.
26
).
Fig.
25
Fig.
26
Note:
The spray gun
(16)
is equipped with a trigger lock in order to prevent
accidental activation of the trigger
(16c)
. Activate the trigger lock when the
product is not in use, when it is left unattended or when setting the product
down (Fig.
23
).
4.
Deactivate the trigger lock by pressing
the deactivate button (
16d
) (Fig.
27
).
5.
Press the trigger
(16c)
, a water jet sprays
out of the nozzle.
6.
Release the trigger
(16c)
to stop the
water outlet.
Fig.
27
16
16c
16d
7.
Activate the trigger lock pressing the
activate button (
16d
) to lock the trigger
in its of
f-position (Fig.
28
).
8.
T
urn the on/of
f switch
(3)
to “
O
”.
Fig.
28
16
16c
16d
General operation
1.
Check the product, its power cord and plug as well as accessories for damage before
each use. Do not use the product if it is damaged or shows wear
.
2.
3.
Always hold the product by the spray gun and lance. Keep the surfaces dry to ensure
safe support.
4.
Ensure that the air vents are always unobstructed and clear
. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
5.
Switch the product of
f immediately if you are disturbed while working by other people
entering the working area.
Always let the product come to complete stop before
putting it down.
6.
Do not overwork yourself.
Ta
ke regular breaks to ensure you can concentrate on
the work and have full control over the product.
Operation
W
ARNING!
Do not operate the product when the ambient temperature is below
0
°C. W
ater will freeze inside the product and damage it.
W
ARNING!
Do not operate the product with a closed water tap!
This leads to
dry running and damage to the product! Rebound forces result from pressing
the trigger!
Therefore, always hold the spray gun with both hands! Pay attention
to safe posture! Improper handling can lead to injuries!
1.
Assemble the product as described.
2.
T
urn on the water tap fully
.
3.
T
urn the On/Of
f switch
(3)
to “
I
”.
4.
Hold the spray gun
(16)
with both hands.
5.
Direct the nozzle of the chosen attachment away from
yourself towards the surface to be cleaned (Fig.
29
).
6.
Press the trigger
(16c)
and direct the water jet to the
object to be washed.
Fig.
29
NOTE:
Always keep a reasonable distance between the nozzle and the object
to be washed in order to avoid damage.
7.
Release the trigger
(16c)
to stop the water jet.
Product functions
GP65-3663602939702-EN-V06.indd 30-31
11/2/16 6:05 PM
