Mac allister MPTP1500B MAC, Original Instructions Manual

Page: 17 / 110

GB
Getting
started...
MPTP1500B MAC
17
Safety
General Safety
10. Connect dust extraction equipment
–
If the tool is provided for the connection of dust extraction and collecting
equipment, ensure these are connected and properly used.
11. Do not abuse the cord
–
Never yank the cord to disconnect it from the socket. Keep the cord away
from heat, oil and sharp edges.
12. Secure work
–
Where possible use clamps or a vice to hold the work. It is safer than
using your hand.
13. Do not overreach
–
Keep proper footing and balance at all times.
14. Maintain tools with care
–
Keep cutting tools sharp and clean for better and safer performance.
–
Follow instruction for lubricating and changing accessories.
–
Inspect tool cords periodically and if damaged have them repaired by
an authorized service facility.
–
Inspect extension cords periodically and replace if damaged.
–
Keep handles dryclean and free from oil and grease.
15. Disconnect tools
–
When not in use, before servicing and when changing accessories such
as blades, bits and cutters, disconnect tools from the power supply.
16. Remove adjusting keys and wrenches
–
Form the habit of checking to see that keys and adjusting wrenches are
removed from the tool before turning it on.
–
Avoid unintentional starting
17. Ensure switch is in "off" position when plugging in.
18. Use outdoor extension leads
–
When the tool is used outdoors, use only extension cords intended for
outdoor use and so marked.
19. Stay alert
–
Watch what you are doing, use common sense and do not operate the
tool when you are tired.
20. Check damaged parts
–
Before further use of tool, it should be carefully checked to determine
that it will operate properly and perform its intended function.
–
Check for alignment of moving parts, binding of moving parts, breakage
of parts, mounting and any other conditions that may affect its operation.