Mac allister MLM1841 Manual Download Page 9

Page: 9 / 40

Getting

started...

MLM1841

by MacAllister

Safety information

WARNING!

This product produces an

electromagnetic field during operation! This field

may under some circumstances interfere with

active or passive medical implants! To reduce

the risk of serious or fatal injury, we recommend

persons with medical implants to consult their

doctor and the medical implant manufacturer

before operating this product!

Symbols

On the product, the rating label and within these instructions you will find among

others the following symbols and abbreviations. Familiarise yourself with them

to reduce hazards like personal injuries and damage to property.

V ~

Volt, (alternating voltage) Hz

Hertz

/min or

Per minute

Watt

min

-1

Gram

Kilogram

Millimetre

Metre

Centimeter

Litre

dB(A)

Decibel (A-rated)

m/s² Metres per second squared

Lock / to tighten or secure.

Unlock / to loosen.

Read the instruction

Note / Remark.

manual.

Caution / Warning.

IPX4

Protection against solid foreign bodies as well as against splashed

water from all directions.

xxWyy Manufacturing date code; year of manufacturing (20xx) and week of

manufacturing (Wyy)

Wear hearing protection.

Wear eye protection.

Wear a dust mask.

Wear protective gloves.

Summary of Contents for MLM1841









































Search results

Summary of Contents for MLM1841

Reviews:

Related manuals for MLM1841

Brands by name

Popular brands

Mac allister MLM1841, Manual

Search results

Summary of Contents for MLM1841

Reviews:

Related manuals for MLM1841

Brands by name

Popular brands