EN
28
In
more
detail...
MLM1334
by MacAllister
Grass catcher
Power cord
5. Replace the cutting blade (12c) with a new one of the same type. Check the
status of flange (12b) onto the spindle (12a) firstly, then attach the cutting
blade (12c) and hex nut (12d) properly. Tighten the hex nut (12d) clockwise
with 20 Nm min, 25 Nm max. to ensure safe operation of your product.
6. Replace this cutting blade after 50 hours mowing or 2 years whichever is
sooner regardless of condition. If the cutting blade is cracked or damaged,
you must immediately replace it with a new one.
7. Lubricate the cutting blade (12c) after each use to prolong the life span of
cutting blade and product. Apply light machine oil along the edge of the cutting
blade.
1. Inspect the grass catcher (8) before each use. Do not use it if you find any
damage.
2. Clean the grass catcher (8) after operation using water and mild soap.
3. Let the grass catcher (8) dry thoroughly before storing to avoid mildew.
If the power cord (4) or inter-connection cord (16) is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a safety hazard.
WARNING!
Do not use the product with a defective or a loose power
cord (4) and inter-connection cord (16)!
12d
12c
12b
12a
Fig. 17
Care and maintenance
