Mac allister M-4545CSP Getting Started Download Page 49

Page: 49 / 62

M-4545CSP

by MacAllister

detail...

Technical and legal information

Release to stop; location: above throttle lever on main

handle

Chain brake disengaged/ engaged; location: on right

side cover

Refill chain oil here; location: oil ca

CHAIN OIL

MAX MIN

CHAIN OIL

MAX

MIN

Indication of chain oil adjuster nut; location: bottom

Do not expose to rain.

Objects thrown by the product could hit the user or

other bystanders. Always ensure that other people

and pets remain at a safe distance from the product

when it is in operation. In general, children must not

come near the area where the product is.

Risk of fire / flammable materia

Hot surface, do not touch. The high temperatures on

the product’s surfaces and structural parts could cause

burns if touched. The product can also remain hot for

a long period of time after operation!

This product produces noxious exhaust fumes. If the

product is not used properly, these fumes can lead to

poisoning, a loss of consciousness or death!

Always unplug the spark plug connector before

performing inspection, maintenance and cleaning

work!

40:1

Only use petrol/oil mixture with a ratio of 40:1. Do not

use any other mixture ratio. Always switch the product

off and let it cool down, before refuelling it.

Naked flames in the work area, around the product and

in the vicinity of flammable materials are prohibited
Do not smoke in the work area, around the product

and in the vicinity of flammable materials
Guaranteed sound power level value in dB

MNL_M-4545CSP_DFT_GB_V4_111107.indd 49

11/7/11 11:37:21 AM

Summary of Contents for M-4545CSP































































Search results

Summary of Contents for M-4545CSP

Reviews:

Brands by name

Popular brands

Mac allister M-4545CSP, Getting Started

Search results

Summary of Contents for M-4545CSP

Reviews:

Brands by name

Popular brands