Mac allister 64 77 19, Original Instructions Manual, Page: 19 / 116

GB
Getting
started...
MSSP120
19
Safety
Additional Safety
1
Safety precautions
–
Warning! Do not use damaged or deformed saw blades.
–
Replace a worn table insert.
–
Only use saw blades recommended by the manufacturer which con­
form to EN 847­1.
–
Make sure that a suitable saw blade for the material to be cut is select­
ed.
–
Wear suitable personal protective equipment. This includes:
–
Hearing protection to avoid the risk of becoming hearing impaired,
–
Respiratory protection to avoid the risk of inhaling harmful dust,
–
Wear gloves when handling saw blades and rough materials. Carry
saw blades in a container whenever practical.
–
Wear goggles. Sparks generated during work or splinters, chippings
and dust coming from the device can lead to loss of eyesight.
–
Connect a dust collecting device to the electric tool when sawing
wood. The emission of dust is influenced, among other things, by the
type of material to be processed, the significance of local separation
(collection or source) and the correct setting of the hood/guide plates/
guides.
–
Do not use saw blades made of high­speed alloy steel (HSS steel).
2
Maintenance and repair
–
Pull out the mains plug for any adjustment or repair tasks.
–
The generation of noise is influenced by various factors, including the
characteristics of saw blades, condition of saw blade and electric tool.
Use saw blades which were designed for reduced noise development,
insofar as possible. Maintain the electric tool and tool attachments
regularly and if necessary, initiate repairs in order to reduce noise.
–
Report faults on the electric tool, protective devices or the tool attach­
ment to the person responsible for safety as soon as they are discov­
ered.
3
Safe work
–
When transporting the electric tool, only use the transport devices.
Never use the protective devices for handling or transport.
–
The floor around the machine must be level, clean and free of loose
particles, such as chips and cutting residues.