DESCRIPTION
Rotary machine is hand operated and will form sheet metal up to 18 Gauge thickness
mild steel (or equivalent). The Rotary machine is constructed of cast iron and steel
ensuring minimum deflection of the workpiece during forming operations. Six die sets are
included, allowing the following operations to be per-formed: wiring, edging, ogee bead,
single bead, and elbow edging.
SAVE THIS MANUAL
You will need this manual for the safety instructions, operating procedures.
Maintenance procedures, trouble shooting, parts list, and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover.
Keep both this manual and your invoice in a safe dry place for future reference.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
1.
KEEP WORK AREA CLEAN.
Cluttered areas invite injuries.
2.
OBSERVE WORK AREA CONDITIONS.
Do not use tools in damp, wet, or
poorly in locations. Don’t expose to rain. Keep work areas well fit. Do not use
electrically powered equipment in the presence of flammable gases or liquids.
3.
KEEP CHILDREN AWAY.
Children must never be allowed in the work area.
Don’t let them handle the benders.
4.
STORE IDLE EQUIPMENT.
When not in use, tools must be locked up in a dry
location without rust. Always lock up tools and keep out or reach of children.
5.
DO NOT FORCE THE ROTARY MACHINE.
It will do the job better and more
safety at the rate for which it was intended.
6.
DO NOT OVERREACH.
Keep proper footing and balance at all times.
7.
MAINTAIN TOOLS WITH CARE.
Keep tools clean for better and safer
performance. Keep handle dry, clean, and free from oil and grease.
8.
STAY ALERT.
Watch what you are dong. Do not operate any machinery
when you are tired.
9.
CHECK FOR DAMAGED PARTS.
Before using any tool, any part that appears
damaged should be carefully checked to determine that it would operate
properly and perform its intended function. Check for alignment and binding of
moving parts, any broken parts or mounting fixtures, and any other condition
