6
1. Take out the two crisscross screws, and install them into the door
holes; turn the screws till to the bottom.
2. Aim at screws to install the handle
3. The screws in the hole at the side of the handle and turn the
screws till them very tight.
4. Screw cap should be put on the screw.
2.3 door space requirements
The unit’s door must be able to open fully as shown.
W × D > 50.8 inch × 58.5 inch
2.4 levelling the unit
To do this, adjust the two levelling feet at the front of the unit. If
the unit is not level, the door and magnetic seal alignments will not
be covered properly. Look down from the top, clockwise and coun-
terclockwise loosening, tightening.
2.5 cleaning before use
Wipe the inside of the unit with a weak solution of bicarbonate
soda. Then rinse with warm water using a Wrung-out sponge or
cloth. Wash the shelves and salad bin in warm soapy water and dry
completely before replacing the unit. Clean the exterior of the unit
with a damp cloth. If you require more information refer to the
Cleaning section.
Summary of Contents for RMI1851XSAB0
