9
FreezerCompartment
RefrigeratorCompartment
(MTV085ICER,MTV095ICER,
MTV110ICER,MTV120ICER)
installation
how to install
1. Select a place with strong, level floor. If the floor is not quite level,
adjust the height of the screw accordingly.
2. Allow sufficient clearance between the refrigerator’s back, also the
side wall, so the door can open fully and to minimize noise.
3. Avoid direct sunlight and heat. Direct sunlight may affect the
enamel coating. Heat sources nearby will cause higher electricity
consumption.
operation instructions
make a test run
1.Your refrigerator is usuallyc leaned by manufacture, however you
may want to clean it before using with a soft towel cloth.
2. After cleaned, replace all parts in proper.
3. Keep the door open and plug the power cord into its own electrical
outlet.
The interior lamp should lit.
4. Properly close the door.
suggestions
t
emperature setting for the beginning installation
For faster cooling in refrigerator compartment, should set temperature
accordingly
Freezer Compartment:
Dialtoposition“MIN”
Refrigerator Compartment :
Dial to position “MAX”
Waiting the unit operates for 3 hours, then turn the freezer and
refrigerator dial knob to middle position between “MIN” and “MAX”.
temperature control
The refrigerator is equipped with 2 independent controls to control the
degree of cooling of the refrigerator and freezer compartment.
freezer compartment
MIN. : Minimum Setting for fairly cold
in freezer compartment.
MAX. :Maximum Setting for the coldest
in freezer compartment.
refrigerator compartment
MIN. : Low volume of air circulation
in refrigerator compartment.
MAX. : High volume of air circulation
in refrigerator compartment.
