mabe MKTG15GNAWB, Use And Care Manual, Page: 49 / 80

23
Possible causes What to do
Performance
(washer)
Pilling Result of normal wear
on poly-cotton blends
and fuzzy fabrics.
While this is not caused by the washer,
you can slow the pilling process by
washing garments inside out.
Snags, holes,
tears, rips or
excessive wear
Pins, brooches, hooks,
sharp buttons, belt
buckles, zippers and
sharp objects left in
pockets.
Fasten snaps, hooks, buttons and zippers.
Remove loose items like pins, objects in
pockets and sharp buttons.
Turn knits (which snag easily) inside out.
Undiluted chlorine
bleach.
Check the bleach package instructions to
use the right amount.
Never add undiluted bleach to wash or
allow clothes to come in contact with
undiluted bleach.
Rinse items that may have chemicals on
them before washing.
Chemicals like
hair bleach or
dye, permanent
wave solution.
Wrinkling
Improper sorting Avoid mixing heavy items (like working
clothes) with light items (like blouses).
Try a fabric softener.
Overloading or
incorrect water level.
Load the washer so clothes have enough
room to move freely and the water covers
all garments.
Incorrect wash
and dry cycles.
Match cycle selection to the type of fabric
you are washing (especially easy care
loads).
Repeated washing in
water that is too hot.
Repeated washing in water that is too hot.