33
Hinge
Sliding hook
BE CAREFUL NOT TO PLACE YOUR HANDS BE-
TWEEN HINGES AND OVEN’S FRAME AS THE
ARMS COULD VIOLENTLY SNAP BACK PINCH-
ING YOUR FINGERS.
2.8 Oven door
The oven door is removable, so the interior of the range becomes more accessible. To remove
the door, fully open it. With both hands slide hinge hooks forward and make sure they are
completely fixed by lightly raising the door.
Raise the door with both hands until realizing how easy it goes out, then pull up.
To replace it, center the arms of the hinges into the bottom slots of the metallic frame and
slide the hooks backward in order to fix the mechanism.
2.7 Surface grates installation
Every time you need to remove surface grates for cleaning, make sure you place them back
in their original position (see figure).
A
B
C
D
E
Rear
wall
2.9 Oven shelves installation
Oven shelves are designed with a stop lock that prevents them from tilting and coming com-
pletely out. This is specially convenient when you take the food in and out of the oven.
To remove oven shelves, slide them towards you, lift up the front and pull out. To replace
them, place the shelf on the support (curved portion of the shelf must face oven’s rear wall
and must be under the stop lock), tilt the front up and push inside the oven cavity until the
shelf passes the stop lock on the oven wall. Next lower the front portion and slide the shelf
as far as it will go.
Shelves can be placed at 5 heights as shown in the
figure. The Cooking Tips section specifies the recom-
mended use for each shelf position.
