Ingeniería de Servicio
19
C. Remove storage drawer, broiler drawer or kick panel. The front leveling legs can be asjusted
from the bottom and the rear legs can be adjusted from the top.
.
D. Use an open- end or adjustable wrench to adjust the levelling legs until the range is level.
E. Replace the drawer or panel
F.Plug the range.
G. Measure the height of your countertop at the rear of the openning (X).
H. Adjust two rear leveling legs so that the rear of cooktop is at the same height as the conter (Y).
I. Slide unit into place.
J. Install oven racks in the oven and position the range where it will be installed.
K. Check for levelness by placing a spirit level in one of the oven racks. Take two readings
–
with
the level placed diagonally first in one dirction and then the other.
L. Adjust front leveling legs until the range is level.
Summary of Contents for EML27NXF0
