22
This dryer
must
be exhausted to the outdoors.
Use only 4” rigid metal ducting for the home exhaust duct.
Use only 4” rigid metal or UL-listed dryer transition duct to connect the
dryer to the home exhaust.
do not
use a plastic vent.
do not
exhaust into a chimney, kitchen exhaust, gas vent, wall, ceiling,
attic, crawl space, or concealed space of a building.
do not
install a screen in or over the exhaust duct.
do not
install a booster fan in the exhaust duct.
do not
use duct longer than specified in the exhaust length table.
Failure to follow these instructions can result in death or fire.
Clean lint
from mesh
Clean lint
from mesh
warning
- fire hazard
correct
venting
incorrect
venting
venting - dryer
venting the dryer
- For the best drying performance, the dryer needs
to be properly vented. The dryer will use more energy and run longer if
it is not vented to the specifications below. Carefully follow the details
on Exhausting in the Installation Instructions.
Ductwork that runs through an unheated area or that is near air
conditioning should be insulated to reduce condensation and lint build-up.
care and cleaning - dryer
the exterior:
Wipe or dust any spills or washing compounds with a damp
cloth. Dryer control panel and finishes may be damaged by some laundry
pretreatment soil and stain remover products. Apply these products away
from the dryer. The fabric may then be washed and dried normally. Damage
to your dryer caused by these products is not covered by your warranty.
the lint filter:
Clean the lint filter
before each use. Slide
out the grid that
covers the filter.
Run your fingers
across the filter.
A waxy buildup may
form on the lint filter from using dryer-added fabric softener sheets.
To remove this buildup, wash the lint screen in warm, soapy water. Dry
thoroughly and replace. Do not operate the dryer without the lint filter
and grid in place. Have a qualified technician vacuum the lint from the
dryer once a year.
This dryer
must
be exhausted to the outdoors.
Use only 4” rigid metal ducting for the home exhaust duct.
Use only 4” rigid metal or UL-listed dryer transition duct to connect the
dryer to the home exhaust.
do not
use a plastic vent.
do not
exhaust into a chimney, kitchen exhaust, gas vent, wall, ceiling,
attic, crawl space, or concealed space of a building.
do not
install a screen in or over the exhaust duct.
do not
install a booster fan in the exhaust duct.
do not
use duct longer than specified in the exhaust length table.
Failure to follow these instructions can result in death or fire.
Clean lint
from mesh
Clean lint
from mesh
warning
- fire hazard
correct
venting
incorrect
venting
This dryer
must
be exhausted to the outdoors.
Use only 4” rigid metal ducting for the home exhaust duct.
Use only 4” rigid metal or UL-listed dryer transition duct to connect the
dryer to the home exhaust.
do not
use a plastic vent.
do not
exhaust into a chimney, kitchen exhaust, gas vent, wall, ceiling,
attic, crawl space, or concealed space of a building.
do not
install a screen in or over the exhaust duct.
do not
install a booster fan in the exhaust duct.
do not
use duct longer than specified in the exhaust length table.
Failure to follow these instructions can result in death or fire.
Clean lint
from mesh
Clean lint
from mesh
warning
- fire hazard
correct
venting
incorrect
venting
