IMPORTANT NOTICE
Do not use oil-based cleaners, such as mineral spirits, to
clean the panels. The oil in the cleaner will prevent the panel
from adhering properly to the wall.
4. Apply two 1/8 to 1/4” beads of silicone to the back of the
corner molding, as shown.
BK-CM-004
5. Press the corner moldings into place. Remove any excess
silicone.
6. Place at least three pieces of masking tape on each
corner molding to hold it in place until the silicone adheres
to the wall panel.
Final Caulking
Apply a bead of the 100% silicone sealant.
IMPORTANT NOTICE
Follow the manufacturer’s instructions on the tube for proper
application. Allow at least 24 hours for silicone to set before
using the shower enclosure.
1. Apply 100% silicone sealant to all of the inside seams, as
shown.
BK-FC-001
2. Also, apply 100% silicone sealant to the exterior edges, as
shown. This silicone sealant is nonpaintable.
BK-FC-002
The installation is now complete. DO NOT discard these
installation instructions. PLEASE LEAVE THEM WITH THE
HOMEOWNER.
Attaching Shower Doors and Accessories
For other accessories, such as shower door, shelf, please
consult the detailed installation guides of these products
Installation Procedure
14
