19
keypad and the desired Channel name will appear from left to right. Press VFO key to move to next
alphabet, then press MENU key to complete Channel name input.
＊
Note: Channel name input can be executed only in MR mode.
＊
Note: User can input 0-9, A-
Z, Symbols ! “ # % &
′
( ) * + , - / : ? (Total 53 characters)
MENU 22
－
PF1 (Programmable Function Key 1)
5 Programmable Functions:
FM+A/B
：
(Default)
FM radio + transceiver reception mode
Press PF1 key to enter FM radio mode, transceiver will be on standby to receive signals. When A band or B
Band receives signal, FM radio will be temporarily cut off, to switch to transceiver mode. When no signals
are received for a few seconds, FM radio will be activated again. Press PF1 key again to turn off FM radio.
＊
Note: See FM radio instructions for FM radio functions.
RADIO
：
FM radio mode
Press PF1 key to enter FM radio mode, transceiver function will be switched off. Press PF1 key again to
turn off FM radio and return to transceiver mode.
＊
Note: See FM radio instructions for FM radio functions.
CALL
：
CALL Mode
Press PF1 key to enter CALL function. Use MENU key or numeric keypad or press PF1 again to exit CALL
function.
＊
Note: It is the same operation to Press & hold VFO key to enter CALL function.
＊
Note: See detailed instructions for CALL function.
SCAN
：
Frequency/Channel Scan
Press PF1 to enter Frequency/Channel Scan mode. Press PF1 again to exit Scan mode.
＊
Note: See detailed instructions for Frequency/Channel Scan.
OFF
：
Turn off PF1 function.
MENU 23
－
BUSY
When busy channel lockout is activated, PTT transmit will not function if signal is received and amplified.
Summary of Contents for AHT-3-UV
Page 1: ......
Page 6: ......
Page 46: ...23 Appendix 1 Appendix 2 23 附錄2 註 組為 正碼 以記號 表示 組為 反碼 1 105 DCS 106 210 DCS 以記號 表示 ...