Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 20 -
4.4 Calibration mode
Before calibrating sensors.
1.
Highlight the option and press “
”
2.
Use “F1” and “F2” key to adjust the dimension
value of calibration paper.
Note: Dimension value is stated on each calibraiton
paper.
4.4.1 Calibrate sensors
To calibrate the IR image.
This function does not exist in NC6000.
Step A: Transmission Calibration.
1.
Open the lid and insert the Calibration tool A
(1.0mm for IR), side with foam downwards.
2.
Insert the dots on calibration tool to the holes on
side plates.
3.
Adjust the position of the Cal tool to the center
part of the bill path.
Dot on Cal. Tool.
Hole on side plate
Make sure the tool is placed
at center.
Step A: 1.0mm for IR
side with foam downwards