1
Important:
Do not switch off the grandMA3 onPC command wing XT too early.
Make sure that you wait until Windows has completely shut down.
All LEDs on the grandMA3 onPC command wing XT must have turned off.
4. Set the power switch to position
O
.
Update the software
The installer package always installs the latest version of the onPC software and the Windows updates!
1. To update, download the latest software version from
.
The required installer is called grandMA3 onPC Windows Hardware Image x.x.x.x.
2. Save the full software image on your computer's hard drive.
3. Extract the entire data from the zip file and copy it onto a USB flash drive (FAT32 formatted, minimum 8 GB).
4. Insert the USB flash drive.
5. Power up the grandMA3 onPC command wing XT.
6. If necessary, tap F8 to choose Boot device and select boot from USB.
7. Follow the onscreen instructions during the update process.
To learn more about the update process, read the
Update grandMA3 onPC windows hardware
Important:
To configure the device, or to update or downdate the installed software, use a grandMA3 console or your PC or
laptop with the grandMA3 onPC software installed. For more information see the topics
.
4
