M7 RA-301, Manual

Page: 3 / 64

3
1. This tool should only be used as a hand operated tool. It is powered by compressed air and is
not insulated against electric shock.
2. This tool is specially designed for tightening or loosening screws. Any application or use of this
tool other than what it is designed for is strictly prohibited.
3. Use only pneumatic accessories on this tool. Never use hand accessories.
4. High sound levels may cause hearing damage. Always wear hearing protection when operating
this tool.
5. Wearing eye/face protection can reduce the danger of high-speed materials being emitted from
this tool during operation.
6. User must wear proper clothing. Loose clothing, long hair, stings, straps, belts and jewelry
should not be worn when operating this tool.
7. Before using this tool, make sure that all couplings and plugs are securely mounted. Air hoses
which are under pressure will cause a whipping action when disconnecting, this can lead to
serious injury!
8. Test run the tool to confirm the rotation direction before practical use. That can reduce the
potential hazard due to unexpected rotating direction.
9. In case of tool insert failure, keep hands away from rotating bit to reduce the risk of being
injured, especially when working in confined spaces.
10.Keep body in well-balanced position to counteract the effects of a sudden break of the insert
tool during operation.
11.Always turn off the air supply and disconnect the air hose before changing driving bit or making
adjustments on the tool.
12.Release the throttle lever/trigger to avoid danger if there’s a failure of energy supply and when
connecting or disconnecting the air hose.
13.Prolonged use will cause user fatigue. Periodic breaks are recommended for user safety.
14.It is recommended to stop operating the tool whenever the user experiences discomfort, tingling
or pain during use.
15.Beware if the compressed air hose breaks unexpectedly, or is being connected or disconnected
improperly. This whipping action may cause injury.
16. Always use caution when operating this tool to prevent injury.
17. Avoid storing this tool where it is subject to high humidity.
Warning: