P.08
P.09
P.10
P.11
P.12
P.13
P.14
P.15
The display generally shows 0%.
In Track mode, assume that the user’s set value is 50Nm. When force applied as the
torque value increase from 0Nm to 25Nm, the screen shows 50%, and so on. When force
decreased, the torque value decreases. When force applied is stopped, the display will
return to the torque setting screen.
The Peak Mode is similar to the Track mode. However, in Peak Mode, the LED light and
the buzzer stops after force applied to the wrench is completely removed.
In Angle mode (Angle series), the two LED light will function as green and red. Assume
that the set angle value is 20°. When the user starts applying force to the wrench, the value
changes from 0°. When the force reaches 80% of the set value, the green LED starts to
flash, and the buzzer starts to sound. When the angle value approaches the set value, the
green LED flashes faster and the buzzer sounds faster.
When the force reaches 100% of the set value, the green LED light up permanently, and the
buzzer sounds continuously. When the force exceeded the set value(101%), the red LED
light up, and the buzzer continues to sound. When force applied stop, the LED lights and the
buzzer stop.
The effects in Peak Mode are similar to what in the Track mode. However, after force
applied is stopped, the display shows the percentage of the last torque value, with the
highest percentage being 100%.
In Angle mode (Angle series), assume that the user’s set value is 50°. When force is
applied such that the angle value increases from 0° to 25°, the screen shows 50%, and so
on. After force applied is stopped, the display shows the percentage of the last angle value,
with the highest percentage being 100%.
1.Please take out the batteries, if the product is not used a long period of time.
2.Please prepare the more backup batteries, when the product is used in other places
without electric power.
3.Do not mix old and new batteries.
4.Do not use the soiled batteries with perspiration and greasiness.
5.Do not throw the batteries at fire, and the batteries have to be recovered.
6.The standard or rechargeable batteries can be used in our products.
7.If the LCD screen cannot display, please check whether the batteries are without
electricity, or replace them.
During the warranty period, if the product’s material or
manufacturing process appears any deficiency, it affects
the product function (include: Non-human factors or
non-resistant external damage). We will provide the
maintenance services with free or replace the qualified
product (the same specification).
P.S: Before completion of the boot process (see section 5.1), do not force in
the torque wrench.
• Please use the correct
size of wrench and socket
to fit into the both ends of
the digital torque adapter,
and keep the wrench,
digital torque adapter and
socket at a mutually
vertical state.
• Before using the products,
please confirm the wrench,
digital torque adapter and
socket which is a mutually
vertical state, and then you
can use the wrench. Next,
the torque value will display
at digital torque adapter.
• If the wrench, digital torque
adapter and socket are not
connected or not kept at a
mutually vertical state, please
do not use the wrench, the
situation will cause the digital
torque adapter’s damage.
5.8 LCD Percentage Display
The LCD battery display has four increments. Greater or equal to 3V is shown as completely
charged; less than 2.8V is shown as 3 increments, less than 2.6V is shown as 2 increments,
and less than 2.4V is shown as one increment; when there is less than 2.3V, all functions will
cease, and the instrument will turn off after the LCD battery indicator flashes for 5 sec.
5.9 Low Voltage Display
In order to make accurate data, press C key each time before using the device. Force state
is prohibited to press C key to avoid get the error initial value.
5.12 Reset
Enter power-saving mode after 2 minutes without using the device, press C key to wake up.
5.13 Power Saving Mode
Press and hold the C key + ▼ (down) key; after 5 sec., all values stored in memory reset to
the preset factory values.
5.10 Reset Memory Function
6.1 Do not utilize any organic solvents to clean the product, such as: alcohol or paint thinner etc.
6.2 Do not place the product nearby any magnetic products.
6.3 Do not exert heavy force or pressure on the LCD screen.
6.4 Do not use the products as striking tools.
6.5 Do not hit the products by using hammer or other tools.
6.6 Exceeding the largest standard torque value may result in the products’damage or accuracy
error (110%).
6.7 Do not use near or place in water.
6.8 Please wipe the product clean with a dry cloth, if the product is wet.
6.9 Do not place the product in the high temperature and damp environment or do not expose
the product to sunlight.
6.10 Do not place the product in the full dust or sand environment.
6.11 Do not violently shake or drop the product.
6.12 Please take out the batteries if the product is not used a long period of time.
6.13 Do not throw the batteries into fire, and the batteries have to be recycled.
6.14 Please read carefully the operating manual, and then follow the guides of the manual,
before using the digital torque adapter.
6.15 Shutdown state is prohibited to use.
6.16 Do not use the additional tools to extend the length of the handle, such as: iron or plastic pipe.
6.17 Do not touch any button when torque is exerted.
6.18 Do not use this product on set up an electric items.
6. Maintenance and Precautions
Press the C key + ▲ (up) key to turn the backlight on or off; the backlight is preset as on.
5.11 Backlight Switch
Switch on or reset when screen continued to appear 110%, it means the device have been
forced exceeds the maximum standard torque value 110%, may result in the products’
damage or accuracy error.
Normal
Overload
5.14 Overload Warning
In order to maintain good accuracy, we recommend that you perform
calibration around once each year.
※
Method of Use
█
Digital Torque Adapter
※
Warranty
█
Warning Note For Using Batteries
█
Product Warranty Limits
We provide the complete warranty for increasing the product quality and life, as well as
provide one year limited warranty with the maintenance of products.
█
The Standard of Product Warranty
Please consult with the agent or the dealer in local.
█
Warranty Serial Number
If the product belongs to any of the non-normal conditions following, the product warranty
will be terminated. These non-normal conditions will require that customers must pay cost in
repairing or materials expenses which are formulated by the agent or the dealer in local.
These non-normal conditions are displayed as below:
1. The purchased product is not from the indicated authorized distribution channels, and it
cannot give the warranty proof.
2. The product serial number is changed, tore and unclear.
3. The customer does not comply with the user guides, it causes improper use to damage
the product. In addition, any damage caused by natural disaster (such as: floods disaster,
fires disaster, earthquakes, lightning stroke, typhoons, insect damage), human factors
(surface scratching, falling, knocking, thumping and liquid infiltrating) and etc.
4. The surface scratching and abrading of any parts of products is regarded as non-warranty
in normal use.
5. The faults of the product are caused by the installed, modified and added with other
components without our authorization, or from the abnormality of other equipment.
6. The acceptable product exchange conditions include: “the product cannot be turned on the
power”, “the buttons cannot be operated”, “the LCD is unable to display” and “the function of
the product is unavailable”. Other situations will be served as maintenance services.
7. We will provide the same specification or better products to maintain customers’ products,
and the defective components which are changed will belong to our company unless
customers have to establish a contract for retaining these.
8. The product warranty limit excludes damages of the products’ appearance and cover.
9. The product warranty limit excludes the products without the authorized distribution
channels.
10. The product warranty limit excludes damages of the product transport.
11. The product warranty limit excludes the product faults caused by the abnormality of
other equipment.
Serial Number inprinted
█
Exclusions From Warranty
Please confirm your product specifications and accessories.
█
Other Suggestions
We will reserve the rights to changing the content of terms, we will post new terms if it has
any changes, but we do not inform individual customers.
█
Reserved Rights
90
NOTE THE WARNINGS
