5
2. Never place your hand near the rotating
accessory. The accessory may kickback over
your hand.
3. Do not position your body in the area where
the power tool will move if kickback occurs.
Kickback will propel the tool in the direction
opposite to the wheel’s movement at the point
of snagging.
4. Use special care when working sharp edges ,
sharp sides etc. Avoid bouncing and snagging
the accessory. Sharp edges, sharp sides
or bouncing have a tendency to snag the
rotating accessory and cause loss of control or
kickback.
5. Do not attach a saw chain , woodcarving blade
or toothed saw blade. Such blades create
frequent kickback and loss of control.
ADDITIONAL GRINDING SAFETY WARNING
1.
Use only wheel types that are recommend for
you power tool and the specific guard designed
for the selected wheel. Wheel for which
the power tool was not designed cannot be
adequately guarded and are unsafe.
2.
The guard must be firmly attached to the power
tool and positioned for maximum safety, so
the least amount of wheel is exposed towards
the operator. The guard helps to protect the
operator from broken wheel fragments and
accidental contact with the wheel.
3.
Wheels must be used only for recommended
applications. For example: Do not grind with the
side of a cut-off wheel. Side forces applied to
these wheels may cause them to shatter.
4.
Always use undamaged wheel flanges that
are of correct size and shape for your selected
wheel. Proper wheel flanges support the wheel
thus reducing the possibility of wheel breakage.
Flanges for cut-off wheels may be different from
grinding wheel flanges.
5.
Do not use worn down wheels from larger
power tools. A wheel intended for a larger
power tool is not suitable for the higher speed
of a smaller tool and may burst.
USE CARE OF ANGEL GRINDER
1. The grinder is intended for grinding.
2. Avoid the wheel impact or force actions,
if this condition occurs, stop the machine
immediately and check the machine.
3. If there is considerable vibration or other
defects are detected in operation, stop the
machine immediately and check the machine
to determine the cause.
4. When grinding metal, flying sparks are
produced. Take care that sparks resulting
from use do not hit persons.
5. Some dust created by power grinding
contains chemicals known to birth defects. Do
not work with materials containing asbestos.
6. Shorten the clean periods when working in
dusty conditions.
7. The machine should only be used only for dry
working.
WARNING:
Some dust created by
power Cutting contains chemicals
known to cause cancer, birth defects or
other reproductive harm. Some examples
of these chemicals are:
a)
lead from lead-based paints
b)
arsenics and chromium from chemically
reacted lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment.
STANDERD ACCESSORIES
Side handle
Non-cutting Guard
Spanner
Flange
Be sure to check the accessories as it is subject
to change by areas and models.
