112
blocked)
a hardware reset.
To do a hardware rest, you have to press and hold the reset
button on the button
of M3 for more than 4 seconds. Then M3‟s
battery power will be blocked
, thereby cutting off the power of
M3. If you briefly click the reset button, it will connect battery
power and proceed with the hardware reset. Hardware reset
results in the lost of all files and data. So it is advisable to do
regular backup of data and files in M3 in a desktop PC and flash
ROM.
Reset
due
to
a
problem in battery
When M3 cannot function due to a complete battery discharge,
use charger to fill up. When M3 is in the state of complete
discharge, do not attempt to run M3. When the battery is
charged, M3 will automatically be under a hardware reset.
Common problems
Dim screen
If you press the power button for a long time, it will turn off
the LCD backlight. In that case, press the power button
again then the backlight will be turned on again.
If the LCD backlight is set to too low a brightness, it may
cause a dim screen. Click Go to Start> Programs> Utilities>
Backlight to adjust the level of backlight.
Backlight can be turned off when it is on automatic turn-off
mode. To make backlight to stay, click Go to Start>
Settings> Control Penal> Display. Then cancel the light turn-
off setting in the light tab.
Error in stylus pen input When the screen is not in proper position, click Go to Start>
Settings> Control Penal> Stylus. Then adjust the screen on
the correction tab.
If the screen does not respond to double click, click Go to
Start> Settings> Control Penal> Stylus. Then adjust double
click grid in the double click tab.
Slow down of program
running speed
If you run too many program at once, it can slow down the
speed. Reduce the number of running programs.