Usage
– how to use
How to use
Step 1. Make sure that the Scanner Program is running.
Step 2. Slide in PDA to the Pistol Grip as shown in the left
diagram. It clicks when a PDA is on the right position.
Step 3. Gently grab the handle of Pistol Grip.
Step 4. Press the Scan Trigger toward barcode to read.
Step 5. After use, press and hold the Release Button to slide
out the PDA from Pistol Grip.
9
Caution
Pistol Grip do not work on RFID
devices. Make sure the two conductors are places
on the rear case of the PDA.
Note
Scan Button on the PDA will still work as
normally while the Pistol Grip is attached.
