M2TECH PALMER POWER STATION User Manual Download Page 2

PALMER POWER STATION

 

LOW NOISE BATTERY POWER SUPPLY/CHARGER 

REVISION P

r

A – NOVEMBER 2011 

 

Copyright © 2011, M2Tech Srl 

2

 

M2Tech 

www.m2tech.biz 

 

Warning! 

Changes or modifications not authorized by the manufacturer can invalidate the 
compliance to CE regulations and cause the unit to be no more suitable to use. The 
manufacturer refuses every responsibility regarding damages to people or things 
due to the use of a unit which has been subject to unauthorized modifications or to 
misuse or to malfunction of a unit which has been subject to unauthorized 
modifications.

 

 

Warning! 

This unit includes a Li-Ion battery. Do not expose the unit to heat of fire! Do not 
open unit nor replace the battery. Refer to qualified personnel for servicing.

 

 
 
 
 
 
 
 
 
 
 
 
 

This unit is compliant with the following CE regulations: CEI EN 55022:2009 Class B (Radiated Emissions), 
CEI EN 55024:1999, CEI EN 55024:A2/2003, CEI EN 55024:IS1/2008 (Radio Frequency Electromagnetic 
Fields, 50Hz Magnetic Field Immunity Test and Electrostatic Discharges – ESD).  

 
 

Recycling 

 
 
 
 
 
 
 

The label above, printed on the product case, indicates that the product, when no more usable, can’t be 
treated as generic garbage, but must be disposed of at a collection point for recycling of electrical and 
electronic equipment, in compliance with the WEEE regulation (Waste of Electrical and Electronic 
Equipment). 
By making sure that this unit is correctly recycled, you will help preventing potential damages to environment 
and human health, which could be caused by a wrong treatment of this product as generic garbage. 
Materials recycling helps saving natural resources. For more in-depth information about recycling this 
product, please contact M2Tech Srl.

Summary of Contents for PALMER POWER STATION












Reviews: