M2Tech
www.m2tech.biz
MITCHELL
STEREO ANALOG ELECTRONIC CROSSOVER
REVISION P
RB
– DECEMBER 2020
Copyright © 2020, M2Tech Srl
26
OK
Sets the
MITCHELL
to operate as a stereo 3-way crossover.
Example 2:
#SM.P
ERR
The command returns ERR because the ”P” value doesn't apply to this command
8.1.5. Set Path (SP)
Set the configuration for one or both channels in a way.
The command has three parameter: w is the way to be configured, c is the channel to be
configured in the chosen way, p is the set configuration (in hex format). Please consult
Appendix A for details on the various configurations available.
#SP
,w,c,p
where:
w = [A,B,C]
c = [B,L,R]
p = 4-digit hex number
A,B,C indicates the way the command is applied to.
B means “Both channels”.
L means “Left channel”.
R means “Right channel”.
Example 1:
#SP,A,B,44A0
OK
Set both channels of way A on the
MITCHELL
to operate as 6dB/Oct low-pass filter, non
inverting.
Example 2:
#SP,B,L,9501
OK
Set left channel of way B on the
MITCHELL
to operate as 30dB/Oct high-pass filter, non
inverting.
Example 3:
#SP,C,R,44
ERR