M2TECH LARSON User Manual Download Page 3

M2Tech

www.m2tech.biz

LARSON
CLASS-A MONOBLOCK POWER AMPLIFIER

REVISION P

R

A – MARCH 2022

Warning!

Changes or modifications not authorized by the manufacturer can invalidate the 
compliance to CE regulations and cause the unit to be no more suitable to use. The 
manufacturer refuses every responsibility regarding damages to people or things 
due to the use of a unit which has been subject to unauthorized modifications or to 
misuse or to malfunction of a unit which has been subject to unauthorized 
modifications.

This unit is compliant with the following CE regulations: CEI EN 55022:2009 Class B (Radiated Emissions), 
CEI EN 55024:1999, CEI EN 55024:A2/2003, CEI EN 55024:IS1/2008 (Radio Frequency Electromagnetic 
Fields, 50Hz Magnetic Field Immunity Test and Electrostatic Discharges – ESD). 

For a proper operation of this unit, all connections to other equipment in the system must be done 
when all equipment are off. Failing to comply with this advice may lead to damage to the LARSON.

The label above, printed on the product case, indicates that the product, when no more usable, can’t be 
treated as generic garbage, but must be disposed of at a collection point for recycling of electrical and 
electronic equipment, in compliance with the WEEE regulation (Waste of Electrical and Electronic 
Equipment).
By making sure that this unit is correctly recycled, you will help preventing potential damages to environment
and   human   health,   which   could   be   caused   by   a   wrong   treatment   of   this   product   as   generic   garbage.
Materials’   recycling   helps   saving   natural   resources.   For   more   in-depth   information   about   recycling   this
product, please contact M2Tech Srl.

WARNING:   the   information  contained  in  this   manual   are   considered  to  be  reliable   and  accurate.
M2Tech reserves the right to change or modify the information any time, without prior advice. It’s up
to the customer to ensure that the manual being consulted is the latest version.

Copyright © 2022, M2Tech Srl

3

Summary of Contents for LARSON


















Reviews: