JOPLIN MKIII
384
k
H
z
/32bit ANALOG-TO-DIGITAL CONVERTER
REVISION P
R
A – APRIL 2019
Copyright © 2019, M2Tech Srl
7
M2Tech
www.m2tech.biz
1. Unpacking and placing the unit
Lay the package on a table and open the external box by removing or cutting the adhesive
tape seal. Then extract the internal box and open it by lifting the front wing. The following
items are included:
one
JOPLIN MKIII
ADC;
one wall adapter;
one A-B USB cable;
a remote control;
two AAA batteries.
Should one or more item be missing, please contact your retail dealer.
Remove the
JOPLIN MKIII
from the foam enclosure and place it onto a stable base, far from
heat sources. Avoid full sunlight on the unit. Allow for ample room around the unit for
venting.
The
JOPLIN MKIII
is a high efficiency device; therefore it doesn’t produce relevant heat
during its operation. Regardless, it’s recommended to guarantee an adequate air flow
around the unit. Moreover, every time it will mainly be operated by remote control, it’s
recommended to place it so as the remote control’s infrared signals can easily reach its
front panel.
Avoid smoke, moisture, dirt and liquids from reaching the unit. Please note that any signs
of abuse will void warranty coverage.
