HIFACE EVO TWO
UNIVERSAL D-TO-D CONVERTER
REVISION P
R
A – AUGUST 2015
Copyright © 2015, M2Tech Srl
11
M2Tech
www.m2tech.biz
3. Rear Panel
M2TECH
AES/EBU
IN S/PDIF OUT
I2S
MADE IN ITALY
OPT
USB IN
CLOCK IN
CLK INFO
VIN
7.5-15V
DC
3
4
5
6
7
8
9
10
11
Figure 2
3) I
2
S output.
Delivers the straight I
2
S signal in PS Audio format. Connect to the I
2
S input
of a DAC or other digital audio device which uses the same format. HDMI connector.
WARNING: this connector does not deliver HDMI signals, do not connect to any
HDMI input.
4) Optical output.
Connect to the Toslink™ receiver of a digital audio device using an
optical interconnect terminated with Toslink™ plugs. Toslink™ transmitter.
5) S/PDIF input.
Connect to the S/PDIF output of a digital audio device. It may be used to
record digital audio on a computer. Female RCA connector.
6) S/PDIF output.
Connect to the S/PDIF input of a digital audio device. Female RCA
connector.
7) AES/EBU output.
Connect to the AES/EBU input of a digital audio device. Male XLR
connector.
8) Supply input.
Connect the stock wall wart or one of the outputs of the
EVO SupplY Two
using one of the cables provided with the latter. 5.5/2.1mm jack.
9) External clock input.
Connect to the output of a clock generator, like the
EVO CLOCK
Two
using a 75 Ohms BNC terminated cable. This input works at its best when connected
to the
EVO CLOCK Two
master clock output, anyway it also accepts standard word clocks
and even the reference 10MHz clock. Female BNC connector.
10) USB port.
Connect to a 2.0 or 3.0 USB port of a computer. The
HIFACE EVO TWO
exchanges audio data with a computer through this connection.
