EVO SUPPLY TWO
VERY LOW NOISE DEDICATED POWER SUPPLY
REVISION P
R
A – JULY 2015
Copyright © 2015, M2Tech Srl
7
M2Tech
www.m2tech.biz
1. Unpacking and Placing the Unit
Lay the box on a table and open it by separating it from the external paperwork and
removing or cutting the adhesive tape seal. The following items are included:
•
one
EVO SUPPLY TWO
;
•
one power cord;
•
three output cables with 5.5/2.1mm jacks.
Should one or more item be missing, please contact your retail dealer.
Remove the
Evo SUPPLY TWO
from the foam enclosure and place it onto a stable base, far
from heat sources. Avoid full sunlight on the unit. Allow for ample room around the unit for
venting.
The
EVO SUPPLY TWO
is a power supply capable of delivering up to 18VA when operating.
Even if its regulators are high efficiency ones, and even if not always all outputs are used,
the unit can produce a relevant heat. Therefore, an adequate air flow is recommended.
Avoid smoke, moisture, dirt and liquids from reaching the unit. Please note that any signs
of abuse will void warranty coverage.
Do not place the unit on thick carpets or inside a box or piece of furniture, not even close
to curtains.
