MANUNTA
BY M2Tech
www.manunta-audio.com
EVO DAC 3
DIGITAL-TO-ANALOG CONVERTER
REVISION P
RB
– JUNE 2022
4. Remote Control
The
Evo DAC 3
comes with a fully-loaded remote control which
allows for setting all of its controls, as well as for controlling other
M2Tech Rockstars series products.
Please note when a command is sent to the
Evo DAC 3
the “DAC”
key blinks in green. If any of the other key “AMP”, “PHONO” or
“PLAYER” blinks instead, the
Evo DAC 3
will not receive the
command. In this case, press the “DAC” key to select the right
commands codes for the
Evo DAC 3
.
Below is a brief description of the relevant keys for the
Evo DAC 3
.
Standby key:
This allows for putting the
Evo DAC 3
in standby
mode (prolonged push) and for awakening it.
DIM:
Display dimming.
DAC:
Instructs the remote to send commands using the DAC
system code.
VOL+/VOL-:
Volume setting.
MUTE:
Mute toggle on/off.
PHASE:
Phase toggle inverting/non inverting. Please note this
setting is not indicated on the front panel.
IN+/IN-:
Input selection.
Player Controls:
these buttons are dedicated to the control of an
audio player running on the computer attached to the
Evo DAC 3
.
The following commands can be sent: Play/pause, stop, next,
track,
previous track
Figure 3
Copyright © 2022, M2Tech Srl
13
