MQ03-LTE-M-FIRE Installation and Operation Manual
Proprietary Content, v.1.1 08/2020
10
5.
The communicator LED indicator will turn on and start blinking. The steady light will indicate a good connection.
The LED has the following states:
LED Status
Indication
Action
The LED is Off
The unit is not connected to the panel
The power from the panel is out
The unit is damaged
Verify the wiring, refer to the wiring diagram.
Measure the AUX output of the panel
Replace the unit
Slow flashing
Trying to establish connection
There is no signal available
Reposition the antenna
Constantly On, blinking
every 5 secs
Connection established at low signal
level
Reposition the antenna
Constantly On
Connection established at good signal
Fast flashing
Transferring data
6.
Download the RControl Admin mobile application on your Android or IOS mobile device.
7.
Login with the end user credentials from the quick installation manual provided with the device.
For more details refer to M2M Smartphone Application Overview V 2.0 at
8.
If the signal is low, reposition the antenna and try again to find a better signal. Antenna faults are to be conducted
in the end-use application to confirm receiver programming of the periodic test reporting. To be verified by the
installer.
Figure 3: Screen Shot from RControl App with information about signal strength.
9.
When the wiring and positioning of the unit is completed, proceed with the programming of the panel (next section).
Programming
Out of the box the communicator is ready to use and does not require additional programming. You need to program the
control panel to work with MQ03-LTE-M-FIRE.
