Project File Up/Download
Meaning of ‘Download’ is transferring projection file data from computer to TOP main
module.
And ‘Upload’ is transferring data from TOP Main module to computer.
Main module data will be saved up forever on flash memory of TOP main module unless
overwriting.
It is possible to transfer data on the main menu, communication setup menu, initial setup
menu, diagnosis menu, and system information menu after connecting download cable
between computer and TOP main module.
it is possible to transfer data on running state
O/S and Font Download
There’s two method for downloading of O/S and Font
The first is
Serial Downloading
:
- Connect download cable between 9-pin serial port and download port of TOP
main module.
- Short circuit between 2
nd
pin and 3
rd
pin of 9pin COM2 D-Sub connector.
- Turn off the power of main module and restart.
- After TOP main module is in the download ready mode, remove the short
circuit connect 9pin D-sub connector to serial port of computer.
- In O/S and Font download mode of TOP Designer on PC, download them to
TOP main module.
- After finishing downloading, TOP main module will be reset automatically.
- Downloadable fonts are bellows.
8X8, 8X16, 16 X 16 dot, 16 X 32dot, 32 X 32 dot font
The Second method for downloading is using of XTOP USB port:
USB downloading
- Short circuit between 2
nd
pin and 3
rd
pin of 9pin COM2 D-Sub connector.
- Turn off the power of main module and restart.
- Connect PC and XTOP with USB A-B type cable.
- In USB Tab of TOP Anywhere on PC, Connect and download OS and Font
Changing Backup Memory Battery
- Open the case of XTOP main body.
- Change the coin battery (3V/SR2032) with new one.
- Close the case. The memory keeps the data during changing battery.
