Industrial HMI Touch Panel Hardware Manual
M
2
I Corporation 20 / 23
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea,
Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr
7.3 Cable Clamp Installation
CAUTION: If you use an extension cable on the USB terminal block, install the cable clamp to prevent the USB
connection from being disconnected or sparking because the cable is disconnected.
(1) Place cable clamp at the screw hole on Rear of the product
and turn the screw to fix it.
(2) Insert USB connector to USB port of the product and pass the cable tie through hole of cable clamp.
(3) Tighten cable clamp and USB cable with the cable tie sufficiently and check that the USB connector is not
pulled out by external force.
