TOPRE Series Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr
13 / 20
Be sure to connect the RD and SD to the RS-232C communication line by crossing each other with a
Twisted Pair Cable. Please connect SG directly.
RS-422/485 communication line must use RDA and RDB as Twisted Pair Cable, SDA and SDB
as Twisted Pair Cable.
Do not use shield wire of communication line as signal ground. It may cause communication failure.
5.2
Ethernet Communication Specifications
5.2.1 Ethernet
Item
Specification
Ethernet Method
IEEE802.3i/IEEE802.3u, 10BaseT / 100BaseT
Speed
10M/100Mbps
Communication Method
Base Band
Switching Method
AUTO MDIX
Maximum Segment Length 100m(Hub between product)
Communication Cable
UTP(Unshielded Twisted Pair)
Modular Jack
RJ-45
5.2.2 RJ–45 Pin Layout
Type
Pin No.
Color
Signal
1
Orange/White TD+
2
Orange
TD-
3
Green/White
RD+
4
Blue
Not Available in 10BaseT
5
Blue/White
Not Available in 10BaseT
6
Green
RD-
7
Brown/White
Not Available in 10BaseT
8
Brown
Not Available in 10BaseT
When HUB is using, Straight cable should be used.
Ex) Straight Cable Wiring: Connect 1:1 according to the wiring diagram above.
In case of do not using HUB,
Do not use HUB, when it is connected directly, Cross Cable should be used.
Ex) Cross Cable Wiring: In the above wiring diagram, TD+ and RD+ are changed,
and TD- and RD- are exchanged.
5.3 USB Communication Specifications
5.3.1 USB Host (*Only TOPRE0700WD)
Type
Item
Specification
USB Interface
EHCI/OHCI Specification Version 1.0, USB2.0/1.1 compatible
Communication Method Control/Bulk
Transfer Speed
480Mb/s
Support Device
USB Storage (FAT16/FAT32 File Format Available)
Connector Type
Type A(1ch)
