Industrial I/O Wireless Device Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea,
Tel: +82-70-465-3366, Fax: +82-31-465-3355,
5 / 16
a. Grounding should be the Class 3 grounding. The cable for grounding should be more than 1.5㎟.
b. grounding point be closed to the products and make short the distance to the ground cable if possible.
■ Installation Precautions
Do not install the location which exceeds allowed temperature. Product can be damaged or shorten the life.
Especially Install environment as below should be avoided.
Do not Install product to the place which the ambient temperature is out of limits, from -10℃ to 50℃ or on the surface
of control board which high pressure equipment is installed.
Do not install to the place where strong shock or vibration continuously have impacted on product.
If the product is left unused for a long time, charge it and store it at room temperature.
Backside of the device and console box should have at least 100mm of space for maintenance and
ventilation, and please be sure to install a cooling fan when you install the device in sealed space.
Use the product indoors only.
Use the product under 2000M altitute.
■ Disposal Precautions
When you dispose of product and battery, please treat it as industrial waste. It can create poisonous
substances or explosion.
■
All field-wiring connections to this unit shall be from Limited Voltage / Limited Current, below 24Vdc
isolated secondary source with an output fuse, or Class 2.
Summary of Contents for MIO-LPG00
Page 1: ......