background image

 

917A-ISP PARTS LIST 

     11.23.05 

DESCRIPTION ......................................... QTY

 

BOOM, 1.0” X .058 X 36.00 SOE TO FIT 3/4.. 1 
BOOM, 3/4” X .049 X 37.75 ALUM.................. 1 
ELEMENTS, 5/16” (INSTALLED) .................... 16 
FOLDED DIPOLE ASSEMBLY ....................... 1 
U-BOLT, 2”, SS   & UNI-SADDLE  .................. 1 
ASSEMBLY MANUAL ..................................... 1 
 

IN HARDWARE BAGS:

 

NUT, 1/4-20, SS .............................................. 2 
LOCKWASHER, 1/4” SPLIT RING SS  ........... 2 
SCREW, 8-32 X 1-1/4”, SS ............................. 3 
LOCKNUT, 8-32, SS ....................................... 2 

 
 
 

M

2

 ANTENNA SYSTEMS, INC. 

4402 N. SELLAND AVE. 

FRESNO, CA 93722 

(559) 432-8873  FAX: 432-3059 

www.m2inc.com  Email:  [email protected]

 

Summary of Contents for 917A-ISP YAGI

Page 1: ...s use even in strong signal areas for greater margin which means less service calls The new 5 16 element design decreases the effects of rain and light snow deterioration often seen in similar antennas The heart of the 917A ISP the folded dipole provides a virtual flat match for over 30 MHz The gain has been designed to roll off quickly above range limits to prevent receiver overload from high pow...

Page 2: ... 3 8 437 7 16 500 1 2 562 9 16 625 5 8 688 11 16 750 3 4 813 13 16 875 7 8 937 15 16 64 616 60 316 59 130 49 828 35 608 44 716 40 067 31 089 26 609 1 580 22 190 17 962 13 948 3 160 5 984 9 933 ELEMENT SPACING 0 00 5 062 5 062 5 062 5 062 FRONT 5 062 5 062 5 062 5 125 5 330 5 330 5 330 5 464 5 875 5 750 5 532 ELEMENT LENGTH REAR 6 750 ...

Page 3: ...36 assembly 1 2 3 Step 2 Attach the folded dipole to the rear boom section by sliding the unit back and forth until it is in place Step 3 Attach the driven dipole with a single 8 32 x 1 1 4 screw 4 Step 4 Attach the rear boom section to the front boom section using the supplied 8 32 x 1 1 4 screws and nylock nuts Step 5 Attach the mounting U bolt and Cradle in the correct polarity holes Use the tw...

Page 4: ...EMENTS 5 16 INSTALLED 16 FOLDED DIPOLE ASSEMBLY 1 U BOLT 2 SS UNI SADDLE 1 ASSEMBLY MANUAL 1 IN HARDWARE BAGS NUT 1 4 20 SS 2 LOCKWASHER 1 4 SPLIT RING SS 2 SCREW 8 32 X 1 1 4 SS 3 LOCKNUT 8 32 SS 2 M2 ANTENNA SYSTEMS INC 4402 N SELLAND AVE FRESNO CA 93722 559 432 8873 FAX 432 3059 www m2inc com Email sales m2inc com ...

Reviews: