4
SATELLITE DISH MOUNT ASSEMBLY
SATELLITE DISH ASSEMBLY
STEP 4:
The
SATELLITE DISH PANELS
come with color coded
dots on the
RIB
to indicate which
PANELS
need to be mated
together for proper alignment. Each dot is labeled with
SERIAL
NUMBERS
and matching
RIB NUMBERS (See FIG. 5).
STEP 5:
The method recommended for assem-
bling the
SATELLITE DISH
requires placing a
stand, which is provided, at the center of
PAN-
ELS
. It does not matter which
PANELS
you
start with as long as they both have the same
numbers labeled on the adjacent
RIBS
. Care-
fully place two
PANELS
with mating numbers
touching onto the
STAND
(See FIG. 6).
FIG. 5
FIG. 6
RIB IDENTIFICATION
(MATE WITH PANEL WITH SAME NUMBER)
SATELLITE DISH SERIAL NUMBER
(WILL BE DIFFERENT FOR YOUR DISH)
STEP 6:
Insert the
FASTENERS
provided into the
holes connecting the two
PANELS
together
(See FIG. 7).
Leave the fasteners finger tight
until all
PANELS
are assembled. Continue add-
ing another
PANEL
with a corresponding
RIB
NUMBER
that matches one of the already as-
sembled
PANELS
. Insert the fasteners into the
third PANEL. Leave fasteners finger tight. Do
not add the
FOURTH PANEL
yet. You will
need to add the
HUB ASSEMBLY
and need to
access the center of the
DISH
for ease of as-
sembly.
FIG. 7
BOLT, 1/4
-
20 X
3/4”,
SS
LOCK WASHER,
1/4”,
SS
NUT, 1/4
-
20, SS
ASSEMBLY STAND
(PROVIDED)
