background image

DESCRIPTION QTY 

BOOM SECTION, 1 X .058 X 60” SOE ............. 1 
BOOM SECTION, 1 X .058 X 60” STR .............. 1 
ELEMENTS, 3/16 ROD x Dimension Sheet ...... 10 
DRIVEN ELEMENT BLOCK ASSEMBLY .......... 1 
BALUN, RG-6 1/2 WAVE ................................... 1 
BOOM-TO-MAST PLATE, .188 X 3 X 4” ........... 1 
U-BOLT AND CRADLE, 2’ ................................. 2 
U-BOLT , 1” ....................................................... 2 
ASSEMBLY MANUAL ....................................... 1 
 

IN HARDWARE BAG: 

SHORTING BAR ............................................... 2 
BUTTON INSULATORS .................................... 20 
SHAFT RETAINER, SS ..................................... 20 
NUT, 5/16-18 SS ............................................... 4 
LOCKWASHER, 5/16 SS .................................. 4 
LOCKNUT, 1/4-20 SS ........................................ 4 
SCREW, 8-32 X 1-1/4, SS ................................. 3 
SETSCREW, 8-32 X 1/4 SS .............................. 4 
LOCKNUT, 8-32 SS........................................... 2 
CABLE TIE, NYLON  ......................................... 3 
ALLEN HEAD WRENCH, 5/64” ......................... 1 
PUSH TUBE, 3/8 X 3” ........................................ 1 
 

 

 

M

2

 ANTENNA SYSTEMS, INC. 

4402 N. Selland Ave. 

Fresno, CA 93722 

(559) 432-8873  Fax: 432-3059 

www.m2inc.com

   Email:  

[email protected]

 

 

 
 
 
 

 

222-10EZ PARTS & HARDWARE 

Summary of Contents for 222-10EZ






Reviews: