M13design M13-RA6M3-EK, User Manual, Page: 26 / 52

User Manual - Rev1.0.2 M13-RA6M3-EK pin assignment
M13design - 16 Dec. 21 26/53
3.10 VGA CAMERA MODULE
The M13-RA6M3-EK board is also capable to drive VGA camera modules with its Parallel Data Capture
Unit (PDC). Through the connector CN8, we provide an 8-bit interface which is compatible with many
modules actually on the market. Table 29 shows the RA6M3 pin assignments. For details on the
connector, see section 4.7 CN9: 8 Bit VGA Camera module .
Table 28. VGA Camera Module Overview
Device Type MFR 1 / MPN 2 I²C Address Package Note
VGA Camera TD Next / TD7740
W: 0010 0000 (0x42)
R: 0010 0001 (0x43)
N/A
Connector
Würth Electronics /
68712414022
N/A
SMD, 0.50mm
Right angle
24 pin - Top contact
CN8
Note 1: Manufacturer name
Note 2: Manufacturer Part Number
Table 29. 8bit VGA Interface Pin Assignment
U1 Pin RA6M3 Pin Functions
Board
Assignment
Signal Name
Default
Function
Remarks
44 P407 / SDA0_B / USB_VBUS Multiplexed SDA0_B IIC0
52 P204 / SCL0_B Main I²C bus SCL0_B IIC0
147 P507 / AN119 Camera CAM_RST GPIO
148 P508 / AN020 Camera CAM_PWR_DN GPIO
174 P512 / VSYNC Camera VSYNC PDC
12 P703 / HSYNC Camera HSYNC PDC
176 P511 / PCKO Multiplexed XLCK PDC / PCKO
13 P705 / PIXCLK Camera PIXCLK PDC
4 P403 / PIXD7 Camera PIXD7 PDC
5 P404 / PIXD6 Camera PIXD6 PDC
6 P405 / PIXD5 Camera PIXD5 PDC
7 P406 / PIXD4 Camera PIXD4 PDC
8 P700 / PIXD3 Camera PIXD3 PDC
9 P701 / PIXD2 Camera PIXD2 PDC
10 P702 / PIXD1 Camera PIXD1 PDC
11 P703 / PIXD0 Camera PIXD0 PDC