Quick Start Guide
S
NAP i.d.
®
2.0 IHC (Immunohistochemistry) System
Before using the
S
NAP i.d.® 2.0 IHC System, please read the full-length user guide available at www.millipore.com/ihc.
Component
Features
Assembly Fixture
Accepts 25 × 75 × 1 mm slide
(slides not provided)
Tissue section target (guides tissue
section size and placement)
Volume markings (for estimating
solution volume required; each
line represents ~ 150 µL)
Disassembly slots
Slide Holder
Injection/recovery port accepts
1 mL pipette tip
Injection/recovery port
Wash reservoir
(6 mL maximum volume)
Slide compression clips (4)
Tissue section chamber
(600 µL maximum volume)
Vacuum flush port
Injection/recovery
port fluid channel
Silicone gasket
IHC Frame
Holds up to 12 slide holders
Vacuum ports (12)
Port plugs (to maintain vacuum
when port is not being used)
Port plug storage holes
Center well for
assembly fixture
storage
Incubation Cover
linker
primary
blocker
reporter
chromogen
Task tracker (for keeping track of steps)
Stacking recesses
(to enable IHC frame stacking off-line)
SNAP i.d.® 2.0 IHC System
Accommodates one or two
IHC frames
Includes tubing assembly kit
Vacuum control knob
For research use only
00119264_RevD.indd 1
1/14/2015 1:26:51 PM
