BICYCLE REPAIR WORKSTAND
Instructions Manual
1. Open the leg quick release, then pull down the extension leg and close the quick
release securely.
2. Open the quick release, then extend to desired height and close the quick
release securely.
3. Open the quick release, then pull the lock lever and push up the arm into position,
and close the quick release securely.
4. Clamp on bike seat post or frame properly, close the handle lever and rotate the
Clamp to set the width (don’t over-tighten).
5. Adjust to desired angle by rotating the angle handle lever and lock it properly.
Warning: It can cause damage or injury to property or persons when fail to tighten or
close the quick release or handle lever.
Leg Quick Release
1
Angle handle lever for adjusting
angle 360
5
Quick Release
for opening or closing the Arm
3
Use handle lever to open or close the Clamp
and rotate the handle lever to adjust the width
4
Quick Release
for adjusting the height
2
360
°
