2. Specifications
3. Functional Description
1.Temperature Controller
4.Spped controller
2.Lamp for heater
5.Lamp for main power
3.Lamp for motor
4. How to use
1.Connect power cord on the rear side and turn on using No.5 button on the front side.
2. Adjust the required setting value using No.1 dial.
( Out put is maximum on No.8 or MAX position)
3.No. 2 lamp is flickerd automatically as per the time and is continuousely lighten on maximum output.
4.Turn No.4 dial, then the motor runs with the lightening of No.3 lamp.
5. To stop the motor run, turn No. 4 dial to MIN counterclockwise.
※Smoke could be happened for 1 -2 hours when heater runs, so, make a ventilation.
※To take out the vessel softly, heat the veseel and take it out when 70% of the heat remains.
※Take out the vessel from the mantle in 5-10 minutes after the work is finished.
※Heating and Stirrer is controlled separately and has power cord respectively.
5. Temperature control
21.8
Heating temperature is controlled by analog temperature controller (Built-in K Type sensor)
EAMS9504-06
1000ml
350W x 6
6
1340 x 330 x 175
85
18
EAMS9503-06
500ml
260W x 6
6
1150 x 300 x 165
75
18.7
EAMS9502-06
250ml
150W x 6
6
1040 x 280 x 150
60
75
9.6
EAMS9504-03
1000ml
350W x 3
3
670 x 330 x 175
85
11.3
150W x 3
3
520 x 280 x 150
60
9.2
EAMS9503-03
500ml
260W x 3
3
580 x 300 x 165
Model
Capacity
Watts
Number of
positions
Dimensions
Internal
(height :
mm)
Weight
(kg)
EAMS9502-03
250ml
2
ON
STIR
3
7
2
1
4
3
4
5
6
8
MIN
5
MAX
HEAT
7
2
1
1
3
4
5
6
8
MIN
MAX
